ILME Catalog

dimensions shown in mm are not binding and may be changed without notice 193 i CQ CQ 17 poles + m 10A - 160V Inserts enclosures: size “32.13” page: insulating type 365 - 367 EMC 573 - 574 inserts, crimp connections 10A crimp contacts silver and gold plated description part No. part No. % for basic or high thickness gold plating, please refer to page 674 CDF and CDM contacts conductor conductor conductors section slot stripping length mm 2 ø A (mm) B (mm) 0,14-0,37 0,9 8 0,5 1,1 8 0,75 1,3 8 1,0 1,45 8 1,5 1,8 8 2,5 2,2 6 ø 1,6 ø A ø 3,2 B ø A ø 3,5 21,6 25 B - characteristics according to EN 61984: 10A 160V 2,5kV 3 10A 250V 4kV 2 - (UL for USA and Canada), certified - rated voltage according to UL/CSA: 250V - LQVXODWLRQ UHVLVWDQFH • *ȍ - ambient temperature limit: -40 °C ... +125 °C - made of self-extinguishing thermoplastic resin UL 94V-0 PHFKDQLFDO OLIH • F\FOHV FRQWDFW UHVLVWDQFH ” Pȍ - seat of PE contact on female insert set forward to obtain pre-leading PE - each insert supplied with 2 fixing screws, self-tapping, zinc plated steel Ø2,9x9,5 mm, Ph1 - it is recommended to crimp the contacts with crimping tools homologated by ILME (please see the crimping tool section 10A contacts, CDF and CDM series on pages 708 - 741) - for max. current load see the connector inserts derating diagram below; for more information see page 28 CR CP coding pin with loss of one contact (page 689) 10 20 30 40 50 60 70 80 90 100 110 0 120 130 0 20 10 2,5 mm 2 2 4 6 8 12 14 16 1,0 mm 2 1,5 mm 2 0,5 mm 2 ambient temperature (°C) CQ 17 poles connector inserts Maximum current load derating diagram working current (A) ZLWKRXW FRQWDFWV WR EH RUGHUHG VHSDUDWHO\ female inserts for female contacts CQF 17 male inserts for male contacts CQM 17 10A female contacts 0,14-0,37 mm 2 AWG 26-22 identification No. 1 CDFA 0.3 CDFD 0.3 0,5 mm 2 AWG 20 identification No. 2 CDFA 0.5 CDFD 0.5 0,75 mm 2 AWG 18 identification No.  CDFA 0.7 CDFD 0.7 1 mm 2 AWG 18 identification No. 3 CDFA 1.0 CDFD 1.0 1,5 mm 2 AWG 16 identification No. 4 CDFA 1.5 CDFD 1.5 2,5 mm 2 AWG 14 identification No. 5 CDFA 2.5 CDFD 2.5 10A male contacts 0,14-0,37 mm 2 AWG 26-22 identification No. 1 CDMA 0.3 CDMD 0.3 0,5 mm 2 AWG 20 identification No. 2 CDMA 0.5 CDMD 0.5 0,75 mm 2 AWG 18 identification No.  CDMA 0.7 CDMD 0.7 1 mm 2 AWG 18 identification No. 3 CDMA 1.0 CDMD 1.0 1,5 mm 2 AWG 16 identification No. 4 CDMA 1.5 CDMD 1.5 2,5 mm 2 AWG 14 identification No. 5 CDMA 2.5 CDMD 2.5 gold plated % silver plated F M 41,6 38,7 22,4 32,2 18,7 36,7 16,7 13,4 2,9 x 9,5 contacts side (front view) 1 23 4 7 6 5 10 9 8 13 12 11 17 16 15 14 1 2 3 4 6 5 7 8 9 10 12 11 13 14 16 17 15 F M

RkJQdWJsaXNoZXIy MzUzMzk=