ILME Catalog

dimensions shown in mm are not binding and may be changed without notice 385 i Enclosures size “66.16” CZ7 - MZ7 standard version RIGID LEVER with single lever CZ7I 25 L with single lever and cover CZ7I 25 LS with single lever MZ7P 25 L25 25 with single lever MZ7P 25 L225 25 x 2 with single lever and cover MZ7P 25 LS25 25 with single lever and cover MZ7P 25LS225 25 x 2 17,5 23 ø 3,4 74 86 98 32 27 5,5 53 98 32 27 5,5 75 Hoods (page 380) 64 101 M 62 40 50 4 57 Ø 4,5 M 77 64 101 M 40 50 4 Ø 4,5 57 M bulkhead mounting housings surface mounting housings with single lever with single lever inserts page: CD 25 poles + m 69 CDD 38 poles + m 77 CDA 16 poles + m 100 CSAH 16 poles + m 101 CDC 16 poles + m 105 description part No. part No. entry M M STAINLESS STEEL LEVER M STAINLESS STEEL LEVER CZ7I L MZ7P L panel cut-out for bulkhead mounting housings CZ7I LS MZ7P LS RIGID LEVER The rigid lever offers an IP66/IP67/IP69 degree of protection (according to EN 60529) when fitted with a complete and coupled connector and used with ILME standard hoods in die cast aluminum with pegs (without adapter). For bulkhead mounting housings, IP66/IP67/IP69 degree of protection is guaranteed for mounting on a sufficiently rigid panel; use M3 screws of suitable length (negligible surface buckling when subjected to tightening torque on the fixing screws of 0,9 - 1 Nm or to deformation caused by the weight of the complete connector). In addition, the panel surface in contact with the flange gasket of the bulkhead mounting housings must be free from defects (deep scratches, grooves, burrs) that could negatively affect the performance of the gasket. E N 6 0 5 2 9 I E C 6 0 5 2 9 IP66 IP67 IP69 cable gland with O-Ring gasket IP67 if coupled with IP67 hood or cover Type 4/4X/12 E N 6 0 5 2 9 I E C 6 0 5 2 9 IP65 insulating cable gland or fittings without gasket

RkJQdWJsaXNoZXIy MzUzMzk=