ILME Catalog

dimensions shown in mm are not binding and may be changed without notice 536 - the lever, due to the vertical closing movement, offers an IP66/IP67 degree of protection (according to EN 60529) when fitted with a complete and coupled connector and used with ILME hoods in die cast aluminum with pegs (without adapter, for further information please contact ILME S.p.A.) - 3.000 hours in salt spray tests (EN ISO 9227) for bulkhead enclosures with V-TYPE lever and hood with moulded pegs (low number of mating cycles) - 2.000 hours in salt spray tests (EN ISO 9227) for surface mounting housings - temperature limits: -40 °C ... +125 °C on request -60 °C ... +180 °C with silicone gasket (125 °C - 180 °C with RY inserts) Enclosures size “104.27“ C7 and M7 - M7A IP67 enclosures V-TYPE lever version E-Xtreme ® description part No. part No. entry M with levers and gasket, size ”104.27” C7IE 24 with levers, size ”104.27“ M7PE 24.25 25 with levers, size ”104.27“ M7PE 24.225 25 x 2 with levers, high construction, size ”104.27“ M7APE 24.32 32 with levers, high construction, size ”104.27“ M7APE 24.232 32 x 2 with levers, high construction, size ”104.27“ M7APE 24.40 40 with levers, high construction, size ”104.27“ M7APE 24.240 40 x 2 C7IE M7PE - M7APE 132 144 M 45 57 4 A Ø 5,5 169 58 M type A M7PE 24 63 M7APE 24 81 3.000 HOURS For bulkhead mounting housings, IP66/IP67 degree of protection is guaranteed for mounting on a sufficiently rigid panel; use suitable length M4 screws (negligible surface buckling when subjected to tightening couple on the fixing screws of 0,8 - 1,2 Nm or deformation caused by the weight of the complete connector). In case of insufficient rigidity use of C7.. FL counterflanges (page 443) is recommended, in which case use suitable length M4 screws and M4 (on the enclosure) and M4 (on the counterflange) flat/spring washers with M4 locknut. In addition, the panel surface in contact with the counterflange gasket of the bulkhead mounting housings must be free from defects (deep scratches, grooves, burrs) that could negatively affect the performance of the gasket. panel cut-out for bulkhead mounting housings bulkhead mounting housings surface mounting housings with 2 levers in stainless steel with 2 levers in stainless steel 2.000 HOURS 112 32 35 ø 4,5 130 142,5 58 169 45,5 6 29 E N 6 0 5 2 9 I E C 6 0 5 2 9 IP66 IP67 IP69 Type 4/4X/12 inserts page: CD 64 poles + m 72 CDD 108 poles + m 81 CDS 42 poles + m - CDSH 42 poles + m 89 CNE 24 poles + m 113 CSE 24 poles + m - CSH 24 poles + m 113 CSH S 24 poles + m 125 CCE 24 poles + m 133 CMSH 10+2 (aux) poles + m 140 CMCE 10+2 (aux) poles + m 141 CSS 24 poles + m 151 CT, CTS (10A) *) 64 poles + m 157 CT, CTSE (16A) *) 24 poles + m 163 CQE 46 poles + m 171 CQEE 64 poles + m 177 CX 4/8 and 6/6 poles + m 204 and 206 MIXO 6 modules 262 - 317 *) can be used only in bulkhead mounting housings E-Xtreme ®

RkJQdWJsaXNoZXIy MzUzMzk=