Featured Products

MKAX-IF Size 21.21 Rectangular Connector Base

Introducing a new addition to the cost effective, space saving, size 21.21 metal housings from ILME! The new MKAX-IF bulkhead mounting base is designed for ease of installation with the convenience of a round mounting thread. No longer do you need to cut a square opening in your panel and punch additional holes for mounting screws. Fewer holes means less opportunity for ingress. The MKAX-IF offers IP69 protection when coupled with the CKR-65 insert washer and screw. Browse>>

Low Profile Panel Interface Connectors

Mencom’s new Low Profile PIC design protrudes from the side of the cabinet 75 percent less than the standard metal housings. The Low-Profile housings are UL listed and available in three sizes; one single cover (LP1), two single covers (LP2) and one double cover (LP3). The transparent polycarbonate cover allows users to see which components are within the enclosure. These enclosures provide an IP65 rating, and feature a unique locking mechanism. Browse>>

industrial networking solutions

Mencom offers a wide range of industrial Ethernet switches such as Managed Switches, Unmanaged Switches, Gigabit Switches, Harsh Environment Switches, and EN50155 Certified Switches. They also offer Secure Routers, Media converters, Serial Device Servers, Modbus Gateways and Power supplies. Browse>>

Front Lock Nut Receptacles

These front mount receptacles with front lock nut are designed for thread mount applications (not a panel mount), that need specific keyway orientations due to the space constraint or any other unexpected engineering situations. Mencom’s new front lock nut receptacles allow the keyway to be freely rotated to any orientation required, by simply adjusting the connector and the front lock nut. Browse>>

Front Locking Receptacle Instruction

Front Locking Receptacle Instruction
1. Thread the receptacle all the way down
2. Back it out until the keyway is orientated in the direction you desire
3. Then turn the front locking nut clockwise until the receptacle is securely mounted

MIL-SPEC Connectors

Mencom MIL-Spec circular connectors include completely over-molded cord sets and pre-wired & epoxied panel mount receptacles. This plug and play design simplifies the installation for the user and eliminates the risk of incorrectly wiring the connector. The standard connectors are provided with the familiar North American Color Codes recognized in the industrial market, but customer specific cables and color codes are possible upon request.


PMIN Connectors

Mencom’s power distribution series provides a cost effective and time efficient plug and play solution for your industrial motor, machine and power applications. These easy to use industrial circular connectors provide a quick disconnect option for applications that demand more power. The PMIN power distribution series is available in 3 pole, 4 pole and 7 pole configurations rated at 600V and up to 30A, with a full line of accessories including adapters, closure caps and plugs. A variety of T’s are also available to create integrated and quick disconnect drops to distribute power to multiple locations throughout the system.

Please Click HERE to browse the new PMIN Series.

Plastic Port Adaprters

Mencom now offers their classic port adapters in a low profile black plastic shell with a M25 mounting thread. They are rated IP65, which means they provide total protection against dust and jets of water from all directions. These new plastic port adapters offer substantial savings compared to the metal versions.

Mencom Rectangular Receptacles

Mencom Rectangular Receptacles come fully wired. All you need to do is attach it to your panel and connect the wires inside your panel. The wires are all black with printed numbers to show their pin location. These receptacles are available in 6 pole to 24 pole configurations. The standard wire length will be 0.5m, 1m and 2m, but can be made in longer lengths by request. 

Please CONTACT US now for additional details.

T35 DIN Rail Mounted Interface Modules

Why Limit Yourself to a Terminal Block Connector on Your DIN Rail?

Mencom Corporation introduces new expandable T35 Series of DIN Rail Modules. The Expandable Din Rail Terminal Modules will allow you the convenience of mounting a wide variety of connectors to your DIN rail. More Details>>

If you have any questions regarding the Din Rail modules, please CONTACT US now for additional details.

Shop M23 Cable & Receptacles

The M23 is a reference to the thread type used in the connection of this product. The M23 series and MINI series are alike, and one could be used in place of the other if needed. The MINI series is more widely used in the US, but M23 connectors are more widely used around the world.

Please Click HERE for more details about M23 Cables & Receptacles.

Mencom Rectangular Connector Kits

Mencom is pleased to announce we are now carrying new Rectangular Connector Kits.  Each standard Multipole Rectangular Connector Kit includes a base, the mating hood and the male and female insert.

Please Click HERE for more details about ILME Kits.

Mencom is pleased to announce we are now carrying new ILME Kits. Each standard Multipole Rectangular Connector Kit includes a base, the mating hood and the male and female insert.

Mencom’s new line of armored, quick disconnect cordsets provides a rugged solution for harsh environments. They are available in MDC(M12) Connectors, Ethernet (M12) connectors, MIN(7/8″) Connectors and NAN(M8) connectors.

Please Click HERE for more details about Armored Cordsets.


Comments are closed.