Solenoid Valve Connectors

Solenoid Valve Connector VDC-089-3401

Mencom carries a full line of DIN 43650 and Industry Standard (I/S) Solenoid Valve Connectors.

What is a Valve Connector?

In engineering, the term solenoid refers to a variety of transducer devices that convert energy into linear motion. The term is also often used to refer to a solenoid valve, which is an integrated device containing an electromechanical solenoid which actuates either a pneumatic or hydraulic valve, or a solenoid switch.

M12 to Form B Valve Connector

M12 to Form B Valve Connector

Connectors may either be purchased individually or as part of a molded cable assembly like the product shown here. (M12 Connector with a standard Form B, 2+ground connector.) Termination options also include field wireable, overmolded cable or pre-wired receptacles.

(See all Valve Connectors)
Connectors come in various “Forms” depending on the configuration of pins and dimensions. The Forms carried by Mencom are listed below.

  • DIN Form A
  • DIN Form B
  • I/S (Industrial Standard) Form B
  • DIN Form C
  • I/S Form C

A variety of circuits are available. The following table shows the standard circuits.

Solenoid Valve Connector Circuit Diagrams

Solenoid Standard Forms

Din Form A Solenoid Valve Connector

Din Form A Solenoid Valve Connector

DIN Form B Solenoid Valve Connector

DIN Form B Solenoid Valve Connector

I/S Form B Solenoid Valve Connector

I/S Form B Solenoid Valve Connector

DIN Form C Solenoid Valve Connector

DIN Form C Solenoid Valve Connector

IS Form C Solenoid Valve Connector

IS Form C Solenoid Valve Connector

Comments are closed.